Sorby Stebcentre No. 2 Morse Taper Drive Center

Sorby Stebcentre No. 2 Morse Taper Drive Center

This ingenious drive center should become a popular tool among spindle turners.The Stebcentre’s spring-loaded center point allows you to set your workpiece in place (or remove it) with the lathe turning.Your workpiece spins when you increase tailstock pressure and the Stebcentre’s teeth bite into the wood.With light pressure – it will drive your work, but allow it to stop if you have a catch, minimizing damage to your workpiece.With increased pressure – it will power through even the heaviest cuts.Since its multiple teeth spread the pressure over a larger area, the Stebcentre is less likely to split your workpiece than a standard spur.

If you don’t know what size Morse Taper you may need, see our guide .