Rikon 10 inch Deluxe Bandsaw 10-3062S with Stand

The 10″ 10-3062S bandsaw from Rikon is their answer to the question ‘What happens if we take a fully featured 14″ bandsaw and make it portable?’ Typically, smaller bandsaws require bigger sacrifices in features, power and creature comforts. With some, you may spend more time setting up a blade or cleaning up than sawing wood. Not so with the 10-3062S.

This bandsaw is loaded with features! Starting with the patented spring-loaded tool-less blade guides, you’ll find setting your guides to within a papers width of the blade a breeze. Tensioning the blade is no longer something that has to be done every time you use the saw with the quick-release tension lever. Set up your tension, saw some wood, then release tension with the quick-release lever until you need to saw again. Clearance is another issue with most 10″ bandsaws typically offering a little over 4″ if you’re lucky. The 10-3062S is designed for a full 5″ of capacity when re-sawing, a perfect height for book matched drawer faces.

Power is derived from a 1/2 hp motor with 2 speed settings. High for wood, and low for non-ferrous metals like brass, copper, and aluminum; just make sure you use the right bi-metal blade! The redesigned frame construction makes for a rigid and vibration free operating environment when tackling denser projects or just going for a leisurely saw through some SPF.

Creature comforts include a cast iron table that tilts from 0° to 45°, a larger tensioning knob, an adjustable aluminum rip fence, side windows for blade tracking, and a storage hanger for the fence and tools. The real creature comfort though is a thoughtfully designed 2-1/2″ dust port. Set higher up on the lower frame, closer to the throat where chips and dust are created, and angled at 10°, this dust port actually enables something most don’t; a way to successfully collect dust!

The 10-3062S is a great starter saw; especially if you do not have a lot of space to spare or need something ultra-portable. It’s also a fantastic secondary saw for the woodworker who wants to keep their main saw dedicated to large capacity cutting. In this scenario, the 10-3062S would be for contours, curves, patterns, etc. with 1/8″-1/4″ blades.

Standout Features for the Model 10-3062S

• NEW Lifetime manufacturer’s warranty.
• SP Coated Table
• Easy Fitting Dust Port
• Steel Pin Door Hinges
• Adjustable Fence Carrier
• Easy Sliding Rip Fence System
• Spring Loaded Tool-less Guide System
• Quick-Release Blade Tension Lever
• Poplular 3/4” x 3/8” Miter Gauge T-Slot
• 2 Blade Speeds 1,515 or 3,280 ft. / min
• Powerful 1/2 hp Motor
• Cutting Height of 5” and 9-5/8” Cutting Width
• Includes stand

Specifications

• Motor – 1/2 hp, 5.5 A, 110 V, 60Hz, 1720 rpm
• Table
• 13-3/4″ x 12-1/2″
• 5° left tilt, 45&deg right tilt
• 3/4″ x 3/8″ miter slot
• Table Height
• 14-1/2″ (saw only)
• 39-7/8″ (on stand)
• Fence – 12-1/4″ x 2-3/8″
• Cutting Capacity – 5″ high x 9-5/8″ wide
• Blade Size – 1/8″ – 1/2″ wide x 70-1/2″ long
• Stock Blade – 5/16″ 6 tpi regular tooth
• Blade Speed – 1515 or 3280 feet/minute
• Size – 34-1/4″ high x 21″ wide x 16-1/4″
• Base – 15-7/8″ x 9-3/8″
• Dust port – 2-1/2″ OD; 2-5/16″ ID
• Net Weight – 86 lb
• Shipping Weight – 92 lb
• Shipping Box 35-1/2″ x 12-3/4″ x 18-1/4″
• Lifetime manufacturer’s warranty

Additional Information

Rikon 10″ Deluxe Bandsaw User Manual 10-3062S

Rikon 10″ Deluxe Bandsaw Information Sheet 10-3062S