Mixol Metallic Effect Tints

Mixol Metallics are aqueous pigments used to add a metallic sparkle to finishes. Since they contain a bit of water, they are not true universal colorants. Mettalics are best used in water-based finishes, but can also be used in shellac and epoxy.

Metallics are most effective in clear finishes. They can be used in paints or other colored finishes, but some finishes may have larger pigment particles that will obscure the metallic effect.) When mixing metallics with Mixol universal tints, use the non-Oxide colors (bottles with white caps) as the larger pigments of the Oxides (bottles with red caps) may obscure the metallic sparkle.

Always test Metallic mixtures before using on your project. You will want to make sure you can acheive you desired level of sparkle in your chosen finish. In addition, you’ll need to check the viscosity of your finish with Mixol Metallic in it. They can make some finishes too thick. We recommend mixing metallics slowly and extensively to insure complete dispersal of the flakes.

Mixol is a universal tint that can be mixed into many finishing products – water-based, solvent-based, oil-based. It can be mixed with paint, stain, epoxy, glaze, shellac, lacquer, putty, filler, grout and many other products. It’s easily cleaned up with water.

Mixol metallics are not a finish on their own, they must be mixed with finish to work. Metallics are concentrated so you won’t need a lot – think drops, not ounces. The pigments are the highest quality – sourced from all over the world. Mixol tints are made in Germany.

Mixol tints are available in 30g (~1oz) and 300g (~10oz) bottles. Maximum recommended concentration (by weight) is 10%, but 3-5% is usually enough.

-->

Additional Information

All about Mixol – a guide to Mixol from the Mixol USA PDF

Mixol Metallic Information Sheet PDF

Mixol Metallic Brochure PDF

Mixol Metallic Shade Card PDF

Click here for SDS

• ME1 Gold SDS PDF
• ME2 Silver SDS PDF
• ME3 Copper SDS PDF
• Collapse list.

Color Chart

Mixol Metallic Effects Tints at 3% Mixture

Color chart images show Metallic Effect Concentrate mixed into clear varnish at 3% by weight and applied to a black-white checkerboard pattern background.