Hock No. 10 Rabbet Plane Iron – 2-1/8 inch

Hock No. 10 Rabbet Plane Iron – 2-1/8″ HC

This blade is for fitting Stanley’s No. 10 (010) Rabbet plane.Record of England also made the same plane.These planes were sometimes referred to as Carriage Makers Rebate Planes.Because the iron protrudes out the slotted sides of the sole of these style planes, the iron will cut right up to an adjacent surface.This will let you trim a rebate or the shoulder of a tenon, right into the corner.

Hock irons have long been prized for their excellent hardness, rigidity and edge retention.This blade is made from ultra fine-grained high carbon tool steel, which takes a sharper edge than alloys like chrome-vanadium steel or HSS.

Read more about how Hock blades can improve the cutting ability of your hand planes.

High Carbon irons are O-1 tool steel fully hardened and tempered to Rc62 on the Rockwell scale&#44 much harder than ordinary tools but not in the least brittle or delicate&#46For the ultimate in durability&#44 Hock&#39s Cryogenically Treated A-2 Tool Steel irons are significantly tougher and more wear resistant than even their own high carbon blades&#46&#34Cryo&#34 irons&#44 conditioned at -320°F&#44 will hold an edge longer than you&#39ve ever experienced&#46They&#39re a little harder to sharpen&#44 of course&#44 but the results are simply amazing&#46

Note that the #80 scraper blade is tempered to Rc56 to be sure its burr is not brittle.Marking knives are beveled on one side only, spear pointed for either right- or left-hand use.The burnisher rod is hardened to Rc64 for very smooth burnishing and shaping.

Block plane irons are identified by the width of the iron and the width of its lateral adjustment slot &#45 please measure your original carefully to be sure you order an iron that will work in your plane&#46

-->