Envirotex Lite Table and Bar Top Epoxy Resin Finish

Envirotex Lite is a reactive polymer compound. It cures to a thick, glossy coating in about 8 hours at 70° F, and reaches full strength and toughness in about 48 hours. This durable, resilient material requires no polishing to reach a high gloss. One coat is all that is usually required for a deep attractive finish, however, two or more coats may be applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to recoating.

Coverage

Envirotex Lite takes about 4 ounces of mixed resin (parts A & B) to cover one square foot.

• 8 ounce Kit (4oz Part A + 4oz Part B) – covers about 2 square feet
• 32 ounce Kit (16oz Part A + 16oz Part B) – covers about 8 square feet
• 1 Gallon ounce Kit (1/2 gallon Part A + 1/2 gallon Part B) – covers about 32 square feet

Features

• The original 1:1 epoxy coating system since 1969
• Convenient 1:1 mix ratio by volume
• 20-30 minute working time
• 8-12 hour tack-free time
• Full cure in 72 hours
• FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured.
• Self-levels to approximately 1/16″
• Produces a durable high-gloss surface coating for artwork, table tops, crafts, and more!

Additional Information

Envirotex Lite MSDS

Envirotex Lite Instructions – English

Envirotex Lite Instructions – Spanish

Envirotex Lite Pro Tips

Envirotex Lite Technical Data Sheet